The AS950 All-Weather Refrigerated Sampler simplifies sampling with a large, full-colour display for intuitive, single-screen programming, USB upload and download capabilities and the ability to copy programs sampler to sampler to save time on tedious programing, and an error alert and status screen to eliminate uncertainty and simplify troubleshooting. The custom-designed air-sensing thermostat controls temperature in accordance with USEPA and international guidelines, preserving samples regardless of outside temperatures and conditions.
- Easiest and most intuitive operation
- Most convenient data transfer and programming available
- Confidence in your sampling process
- Resists corrosion
- Accurate and consistent sample preservations
Automatic shutdown: Multiple Bottle Mode: After complete revolution of distributor arm (unless Continuous Mode is selected)Composite Mode: After preset number of samples have been delivered to composite container, from 1 to 999 samples, or upon full container.
Base Configuration: 230V base with lock, AU
Bottle Set: Discrete (4) 2.5 gallon polyethylene bottle kit
Factory Installed Options: Please contact your Hach sales representative for details.
Internal clock: ±1 second per day at 25 C
Memory: Sample history: 4000 records;Data log: 325,000 records;Event log: 2000 records
Programs: Dual Programs: Up to 2 sample programs can be run sequentially, in parallel, or according to day of week scheduling; enabling a single sampler to function like multiple samplers
Pump flow rate: 4.8 L/min at 1 m vertical lift with 3/8" intake tube typical
Rain gauge input: нет
Refrigeration components and plumbing: Corrosion protected with conformal all exposed copper tubing is insulated to avoid sweating and condensation
Sample pump: High-speed peristaltic, dual roller, with 0.95 ID x 1.6 OD cm (3/8" ID x 5/8" OD) pump tube;Pump body IP37, Polycarbonate cover
Sample transport velocity: 0.9 m/s with 4.6 m vertical lift, 4.9 m of 3/8" Vinyl intake tubing, 21 C and 1524 m elevation
Sample trigger: When equipped with flow sensor or pH/temperature sensor or peripheral monitoring options, sampling can be triggered upon an upset condition when field selectable limits are exceeded
Sample volume repeatability: Typical: ±5% of 200 mL sample volume with: 4.6 m vertical lift, 4.9 m of 3/8" Vinyl intake tube, single bottle, full bottle shut-off at room temperature and 1524 m elevation
Status messages: Communicates what program is running, if there are any missed samples, when the next sample will be taken, how many samples remain, number of logged channels, time of last measurement, memory available, number of active channels, if alarms were triggered, when alarms were triggered, active sensors and cabinet temperature
Suction Hose Outer Diameter: 1/4" and 3/8" ID PTFE-lined Polyethylene with protective outer cover available in clear and black.
Tubing: Pump tubing: 9.5 mm ID x 15.9 mm OD SiliconeIntake tubing: 1.0 - 4.75 m minimum length, 1/4" or 3/8" ID Vinyl or 3/8" ID PTFE-lined Polyethylene with protective outer cover (black or clear)
Vertical lift: 8.5 m using 8.8 m maximum of 3/8" Vinyl intake tube at sea level at 20 to 25 C
Вес: 86 kg
Возможности передачи данных: USB and optional RS485 (Modbus)
Входы: One 0/4-20 mA input for flow pacing
Гарантия: 24 месяцев
Диагностика: View event and alarm logs as well as maintenance diagnostics
Дисплей: 1/4 VGA, Colour; self-prompting/menu-driven program
Добавить датчики?: No
Интервал отбора проб: Selectable in single increments from 1 to 9999 flow pulses or 1 to 9999 minutes in one minute increments
Конейнер для проб: 4 x 10 L
Материал корпуса: PC/ABS blend, NEMA 4X, 6, IP68, corrosion and ice resistant (Controller)
Материал корпуса (датчик): IP24, low-density Polyethylene with UV inhibitor (Sampler)
Объем пробы: Programmable in 10 mL increments from 10 - 10,000 mL
Ополаскивание: Strainers: Choice of PTFE and 316 stainless steel construction, or all 316 stainless steel in standard size, high velocity, and low profile for shallow depth applicationsPurge: Air purged automatically before and after each sample;duration automatically compensates for varying intake line lengthsRinse: Intake line automatically rinsed with source liquid prior to each sample, from 1 to 3 rinsesRetries or Fault: Sample collection cycle automatically repeated from 1 to 3 times if sample not obtained on initial attempt
Пользовательский интерфейс: Membrane switch keypad with 2 multiple function soft keys
Порты датчиков: No
Размеры: 76 cm x 81 cm x 130 cm
Режим отбора образца: Pacing: Time weighted, Flow weighted, Time table, Flow table, EventDistribution: Single bottle composite, multi-bottle composite, multi-bottle discrete, bottles per sample, samples per bottle or a combination of bottles per sample and samples per bottle
Режим работы: Continuous or non-continuous
Режимы измерений: Access code protection prevents tampering
Ручной отбор пробы: Initiates a sample collection independent of program in progress
Сертификаты: CE, UL
Система охлаждения: Top mounted compressor and fan-forced air cooled condenser; 11/5 HP 115 VAC: 115 C thermal overload protector, 7.1 locked rotor amps; 230 VAC: 120 C thermal overload protector, 7.6 A peak start current; 3-sided wraparound plate type evaporator; Rigid foam insulation: 7.6 cm sides, 12.7 cm top, 15.2 cm bottom; Lockable lid to prevent tampering with programming; Recovery Time: Sampler temperature recovers to 4 C within 5 minutes after door has been held open for one minute in 24 C ambient environment while in an active cooling cycle; Pull Down Time: from 24 C to 4 C , 20 minutes; Temperature Control: 4 C (±0.8 C)
Сообщения об ошибках: Configurable alarms that show on status screen and are recorded in diagnostics alarm logs. Alarms can be set for system diagnostics and logging such as program end, sample complete, missed samples and full bottle. Channel alarms are setpoint alarms for the recorded measurements (channels), such as pH, level and power supply voltage.
Температура: Operating: AWRS: 0 - 50 CAWRS with optional controller compartment heater: -40 - 50 CAWRS with controller compartment heater and AC battery back up: -15 - 40 CStorage: -30 - 60 C
Тип корпуса: With controller compartment heater
Точность объема образца: Typical: ±5% of 200 mL sample volume with: 4.6 m vertical lift, 4.9 m of 3/8" Vinyl intake tube, single bottle, full bottle shut-off at room temperature and 1524 m elevation
Требования к питанию (напряжение): 115 V
Требования к питанию (частота): 50 - 60 Гц
Хранение данных: SAMPLE HISTORY - Stores up to 4000 entries for sample time stamp, bottle number and sample status (success, bottle full, rinse error, user abort, distributor error, pump fault, purge fail, sample timeout, power fail and low main battery).MEASUREMENTS - Stores up to 325,000 entries for selected measurement channels in accordance with the selected logging interval.EVENTS - Ability to store up to 2000 entries in Sample History logging. Records Power On, Power Fail, Firmware Updated, Pump Fault, Distributor Arm Error, Low Memory Battery, Low Main Battery, User On, User Off, Program Started, Program Resumed, Program Halted, Program Completed, Grab Sample, Tube Change Required, Sensor Communication Errors, Cooling Failed, Heating Failed, Thermal Error Corrected.
Что в коробке: 1 ea. AS950 controller on 115 V All Weather base with controller compartment heater1 ea. Bottle kit (AW040030) includes 4 x 10 L PE bottles w/caps (2315) and distributor arm (8843)1 ea. 7 m vinyl intake tubing (920)1 ea. strainer (926)
Языки интерфейса: English, French, Spanish, Italian, German, Portuguese, Chinese
Языки пользовательского интерфейса: Chinese, English, French, German, Italian, Spanish, Portuguese
Easiest and most intuitive operation
The large full colour display and intuitive programming give you access to all your programmable criteria on a single screen - eliminating scrolling through menus and supporting error-free operation.
Most convenient data transfer and programming available
The AS950 is the only sampler that utilises a USB drive to upload and download data and copy programs from one sampler to another.
Confidence in your sampling process
The program status screen instantly communicates alarms, missed samples and program progress for quick and easy troubleshooting.
The All-Weather Refrigerated (AWR) sampler base is designed to endure humid and highly corrosive environments, minimising damage caused by corrosive gases, rodents, and standing water to guarantee environmental integrity.
Accurate and consistent sample preservations
The custom-designed air-sensing thermostat controls temperature in accordance with USEPA and international guidelines, preserving samples regardless of outside temperatures and conditions.
Что в коробке
1 ea. AS950 controller on 115 V All Weather base with controller compartment heater
1 ea. Bottle kit (AW040030) includes 4 x 10 L PE bottles w/caps (2315) and distributor arm (8843)
1 ea. 7 m vinyl intake tubing (920)
1 ea. strainer (926)